Matrix Switch

Connectors

• Female RJ45 input/output connectors.
• Female RJ45 Ethernet connector.
  • 10/100 BaseT Ethernet interface
• Male DB9 connector
• Female SCSI 68-pin connector

Power

• 110 or 220 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.)

Environmental

• Operating temperature: 32° to 100°F (0° to 38°C).
• Storage temperature: -20° to 140°F (-30° to 60°C).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

MTBF

• PRIMUX-8X32: 51,893 hrs
• RIMUX-16X64: 37,822 hrs

Warranty

• Two years

On Screen Display

• Use keyboard or mouse to operate the switch from menus superimposed onto the monitor.
• Displays the platform, name, and power status of the connected servers.
• Allows color skew and video compensation fine tuning for optimal video quality.
• Locate and select servers by name.
• Names can be up to 16 characters long.
• Help Screens assist users with OSD.
• Modify the size and position of the OSD.
• OS- and software-independent.
• Various administrator configuration features, including users, servers and user stations.

  Security

  • Administrator can enable or disable all security features and select which servers each user can access.
  • Add or remove authorized users.
  • Set individual user names and passwords for each user.

Modes of Operation

• Normal– a user connected to a host.
• Scan– user is subsequently connected to hosts from a list.
• Sharing– the administrator can select for each host a sharing attribute, which defines multiple user access to the host.
  • None (not shared)– one user is connected to the host and controls it. No other user may select nor control that host.
  • Limited (video shared)– one user is connected to and controls the host. Other users may select and see the video output from the host, but not control the host.
  • Full (shared)– a host may be selected by many users; the host is still controlled by one user, but its control may be given to any other user after an inactivity timeout (share idle time).

RS232

• Configuration can be done through the serial port.
• Baud rate: 115200.

Ethernet Control

• Configuration can be done over the Internet via Telnet.
• 10/100 BaseT Ethernet interface.

Downloads

• Download new firmware.

• Use CAT5/5e/6 UTP cable to connect Host Adapters and User Stations to the switch.
• Cables not included.

Host Adapters

Hosts

• One platform-specific (USB + PS/2, SUN, Serial) HA-x host adapter is required for each computer.
• HA-UNV
  • Compatible with PS/2 and USB computers with VGA video.
  • One male 15-pin HD, one male 6-pin miniDIN, and one male USB Type A connectors.
    
    • Includes female USB Type A to male 6-pin miniDIN adapter.
• HA-SUN
  • Compatible with legacy SUN computers with VGA video.
  • One male 15-pin HD and one male 8-pin miniDIN connectors.
• HA-RS-M
  • Compatible with most serial devices with an RS232 port.
  • One female RJ45 EIA-232 serial port connector.
  • Supported signals: TXD, RXD, DSR, DTR, CTS, RTS
  • Emulates an ASCII terminal – converts serial data from ASCII device into VGA video

Power

• HA-UNV/HA-SUN: power provided by the host computer.
• HA-RS-M: power provided by the host serial device via USB Type A connector.

Regulatory Approvals

• RoHS